Isotope Ratio Mass Spectrometry Research Articles

Contact‐Electro‐Catalysis for Direct Oxidation of Methane under Ambient Conditions

AbstractThe conversion of methane under ambient conditions has attracted significant attention. Although advancements have been made using active oxygen species from photo‐ and electro‐ chemical processes, challenges such as complex catalyst design, costly oxidants, and unwanted byproducts remain. This study exploits the concept of contact‐electro‐catalysis, initiating chemical reactions through charge exchange at a solid–liquid interface, to report a novel process for directly converting methane under ambient conditions. Utilizing the electrification of commercially available Fluorinated Ethylene Propylene (FEP) with water under ultrasound, we demonstrate how this interaction promote the activation of methane and oxygen molecules. Our results show that the yield of HCHO and CH3OH can reach 467.5 and 151.2 μmol ⋅ gcat−1, respectively. We utilized electron paramagnetic resonance (EPR) to confirm the evolution of hydroxyl radicals (⋅OH) and superoxide radicals (⋅OOH). Isotope mass spectrometry (MS) was employed to analyze the elemental origin of CH3OH, which can be further oxidized to HCHO. Additionally, we conducted density functional theory (DFT) simulations to assess the reaction energies of FEP with H2O, O2, and CH4 under these conditions. The implications of this methodology, with its potential applicability to a wider array of gas‐phase catalytic reactions, underscore a significant advance in catalysis.

Contact-Electro-Catalysis for Direct Oxidation of Methane under Ambient Conditions.

The conversion of methane under ambient conditions has attracted significant attention. Although advancements have been made using active oxygen species from photo- and electro- chemical processes, challenges such as complex catalyst design, costly oxidants, and unwanted byproducts remain. This study exploits the concept of contact-electro-catalysis, initiating chemical reactions through charge exchange at a solid-liquid interface, to report a novel process for directly converting methane under ambient conditions. Utilizing the electrification of commercially available Fluorinated Ethylene Propylene (FEP) with water under ultrasound, we demonstrate how this interaction promote the activation of methane and oxygen molecules. Our results show that the yield of HCHO and CH3OH can reach 467.5 and 151.2 μmol ⋅ gcat -1, respectively. We utilized electron paramagnetic resonance (EPR) to confirm the evolution of hydroxyl radicals (⋅OH) and superoxide radicals (⋅OOH). Isotope mass spectrometry (MS) was employed to analyze the elemental origin of CH3OH, which can be further oxidized to HCHO. Additionally, we conducted density functional theory (DFT) simulations to assess the reaction energies of FEP with H2O, O2, and CH4 under these conditions. The implications of this methodology, with its potential applicability to a wider array of gas-phase catalytic reactions, underscore a significant advance in catalysis.

Molecular composition and characteristics of Sediment-adsorbed Dissolved Organic Matter (SDOM) along the coast of China

Sediment-adsorbed Dissolved Organic Matter (SDOM) in coast plays a crucial role in the terrestrial and marine carbon cycle processes of the global environment. However, understanding the transport dynamics of SDOM along the coast of China, particularly its interactions with sediments, remains elusive. In this study, we analyzed the δ13C and δ15N stable isotopic compositions, as well as the molecular characteristics of SDOM collected from coastal areas spanning the Bohai Sea (BS), Yellow Sea (YS), East China Sea (ECS), and South China Sea (SCS), by using isotope ratio mass spectrometry and Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR-MS). We identified the predominant sources of carbon and nitrogen in coastal sediments, revealing terrigenous origins for most C and N, while anthropogenic sources dominated in the SCS. Spatial variations in SDOM chemodiversity were observed, with diverse molecular components influenced by distinct environmental factors and sediment sources. Notably, lignins and saturated compounds (such as proteins/amino sugars) were the predominant molecular compounds detected in coastal SDOM. Through Mantel tests and Spearman's correlation analysis, we elucidated the significant influence of spatial environmental factors (temperature, DO, salinity, and depth) and sediment sources on SDOM molecular chemodiversity. These findings contribute to a more comprehensive understanding of the carbon cycle dynamics along the Chinese coast.

Trace the origin of yak meat in Xizang based on stable isotope combined with multivariate statistics

In this study, the feasibility of tracing the origin of yak meat in Xizang Autonomous Region based on stable isotope combined with multivariable statistics was researched. The δ13C, δ15N, δ2H and δ18O in yak meat were determined by stable isotope ratio mass spectrometry, and the data were analyzed by analysis of variance, fisher discriminant analysis (FDA), back propagation (BP) neural network and orthogonal partial least squares discrimination analysis (OPLS-DA). The results showed that the δ13C, δ15N, δ2H and δ18O had significant differences among different origins (P < 0.05). The overall original correct discrimination rate of fisher discriminant analysis was 89.7 %, and the correct discrimination rate of cross validation was 88.2 %. The correct classification rate of BP neural network based on training set was 93.38 %, and the correct classification rate of BP neural network based on test set was 89.83 %. The OPLS-DA model interpretation rate parameter R2Y was 0.67, the model prediction rate parameter Q2 was 0.409, which could distinguish yak meat from seven different producing areas in Xizang Autonomous Region. The results showed that the origin of yak meat in Xizang Autonomous Region can be traced based on stable isotope combined with multivariate statistics.

Simultaneous detection of testosterone, nandrolone, and boldenone esters in dried blood spots for doping control in sports by liquid chromatography-tandem mass spectrometry.

Testosterone, nandrolone, and boldenone, which are listed as doping substances on the World Anti-Doping Agency Prohibited List, are mostly available commercially in esterified forms. Isotope ratio mass spectrometry (IRMS) represents a key tool for identifying these substances, as they are hydrolyzed and discharged in the urine as pseudo-endogenous substances. However, IRMS, which comprises a complicated process, cannot achieve the direct detection of steroid esters in blood samples. These substances can be detected using dried blood spots (DBSs), reducing the impact of esterase hydrolysis. Here, a simultaneous liquid chromatography-tandem mass spectrometry method for detecting 28 steroid (13 testosterone, nine nandrolone, and six boldenone) esters was developed using three DBS types of samples, including a cellulose paper and polymer. The substances were first derivatized with methyloxime to increase their sensitivities (the limits of detection were <0.1-0.4, <0.1-0.9, and <0.1-0.9ng/mL for the testosterone, nandrolone, and boldenone esters, respectively). Further, the DBS absorbents were verified since the effect of interferences depended on it. Next, a study involving seven participants was conducted to detect intramuscularly administered testosterone enanthate (100 mg). Polymer and cellulose papers were used to collect blood from their upper arms and fingertips, respectively, and testosterone enanthate was identified and detectable at both blood-collection sites for up to 144 and 216 h, respectively. Furthermore, testosterone enanthate was detectable in the DBS samples stored under refrigeration after 6 months, indicating the stable nature of DBS.

Geographical origin identification of Pujiang Kyoho grapes in China using stable isotope and elemental profiles

Grapes are an important seasonal fresh fruit in China, and their quality and nutrition is closely linked to their geographical origin. Stable isotopes and elemental profiles of grapes and corresponding soils from different regions and harvest years were determined using isotope ratio mass spectrometry (IRMS) and inductively coupled plasma mass spectrometry (ICP-MS). Results showed that stable isotope ratios and most elemental contents of grapes were significantly correlated to distinct regions and different harvest years. Na, Li, V, Co, Ni and Pb contents of grapes and corresponding soils were positively correlated, while Mg, Cu, Rb and Sr were negatively correlated (p < 0.05). A supervised chemometric model (random forest) was used to discriminate PGI Pujiang grapes from four other grape producing regions with 100% accuracy. These findings confirm that stable isotopes and multi-elements combined with chemometric analysis can effectively improve the accuracy of grape origin identification and minimize fraudulent mislabeling.

Isotope Ratio Mass Spectrometry for Geographical Origin Authentication and Adulteration Determination in Food Products

Isotope Ratio Mass Spectrometry for Geographical Origin Authentication and Adulteration Determination in Food Products

Oxygen Isotope and Fluorine Impurity Signatures during the Conversion of Uranium Ore Concentrates to Nuclear Fuel.

Within the front end of the nuclear fuel cycle, many processes impart forensic signatures. Oxygen-stable isotopes (δ18O values) of uranium-bearing materials have been theorized to provide the processing and geolocational signatures of interdicted materials. However, this signature has been minimally utilized due to a limited understanding of how oxygen isotopes are influenced during uranium processing. This study explores oxygen isotope exchange and fractionation between magnesium diuranate (MDU), ammonium diuranate (ADU), and uranyl fluoride (UO2F2) with steam (water vapor) during their reduction to UOx. The MDU was precipitated from two water sources, one enriched and one depleted in 18O. The UO2F2 was precipitated from a single water source and either directly reduced or converted to ADU prior to reduction. All MDU, ADU, and UO2F2 were reduced to UOx in a 10% hydrogen/90% nitrogen atmosphere that was dry or included steam. Powder X-ray diffraction (p-XRD) was used to verify the composition of materials after reduction as mixtures of primarily U3O8, U4O9, and UO2 with trace magnesium and fluorine phases in UOx from MDU and UO2F2, respectively. The bulk oxygen isotope composition of UOx from MDU was analyzed using fluorination to remove the lattice-bound oxygen, and then O2 was subsequently analyzed with isotope ratio mass spectrometry (IRMS). The oxygen isotope compositions of the ADU, UO2F2, and the resulting UOx were analyzed by large geometry secondary ion mass spectrometry (LG-SIMS). When reduced with steam, the MDU, ADU, and UO2F2 experienced significant oxygen isotope exchange, and the resulting δ18O values of UOx approached the values of the steam. When reduced without steam, the δ18O values of converted ADU, U3O8, and UOx products remained similar to those of the UO2F2 starting material. LG-SIMS isotope mapping of F impurity abundances and distributions showed that direct steam-assisted reduction from UO2F2 significantly removed F impurities while dry reduction from UO2F2 led to the formation of UOx that was enhanced in F impurities. In addition, when UO2F2 was processed via precipitation to ADU and calcination to U3O8, F impurities were largely removed, and reductions to UOx with and without steam each had low F impurities. Overall, these findings show promise for combining multiple signatures to predict the process history during the conversion of uranium ore concentrates to nuclear fuel.

Employing 11-Ketotestosterone as a Target Analyte for Adrenosterone (11OXO) Administration in Doping Controls.

Adrenosterone (Androst-4-ene-3,11,17-trione, 11OXO) is forbidden in sports according to the Prohibited List of the World Anti-Doping Agency. The administration of 11OXO may be detected by monitoring the urinary concentrations of its main human metabolites 11β-hydroxy-androsterone and 11β-hydroxy-etiocholanolone. Preliminary urinary concentration and concentration ratio thresholds have been established for sports drug testing purposes, but adaptations are desirable as the suggested limits would result in numerous suspicious findings due to naturally elevated concentrations and ratios. Recently, the metabolism of 11-oxo-testosterone (KT) was investigated in the context of anti-doping research, resulting in a preliminary urinary concentration threshold and a confirmation procedure based on the determination of carbon isotope ratios (CIRs). Gas chromatography coupled to isotope ratio mass spectrometry was employed to investigate the CIRs of selected steroids. As KT is also a metabolite of 11OXO, the developed protocols for KT have been tested to elucidate their potential to detect the administration of 11OXO after a single oral dose of 100 mg. In order to further improve the analytical approach, the threshold for urinary concentrations of KT was re-investigated by employing a reference population of n = 5232 routine doping control samples. Quantification of urinary steroids was conducted by employing gas chromatography coupled to triple quadrupole mass spectrometry. Derived from these, a subset of n = 106 samples showing elevated concentrations of KT was investigated regarding their CIRs. By means of this, potentially positive samples due to the illicit administration of 11OXO or KT could be excluded, and the calculation of reference population-derived thresholds for the concentrations and CIR of KT was possible. Based on the results, the urinary concentration threshold for KT is suggested to be established at 130 ng/mL.

Comparative Analysis of Water Isotopic Compositions: Evaluating Isotope Analyzer for Soil and Extraction Method for Stem Water

Stable isotopes of water (δ2H and δ18O) are reliable tracers for the investigation of plant–soil–water interactions in forest ecosystems. However, variations in isotopic compositions may arise due to differences in analytical instruments and water extraction methods. In this study, we conducted three different experiments to identify isotopic differences caused by analytical and methodological variations. First, we analyzed soil water by using the two most commonly applied methods: isotope ratio mass spectrometry (IRMS) and cavity ring-down spectroscopy (CRDS). Second, we compared the isotopes in xylem water extracted from the stems of nine tree species using cryogenic vacuum distillation (CVD) with different heating times. Third, we compared the compositions in xylem water extracted with three different methods: mechanical squeezing using a pressure chamber (PC), an induction module (IM), and CVD. The differences in isotopic composition between IRMS and CRDS were significant but minimal. Soil properties were not significant factors contributing to differences between the two instruments. For the xylem water extraction with CVD, each of the nine tree species required heating for more than three hours. Significant differences were observed in δ2H among the three extraction methods for xylem water. Xylem water extracted by CVD showed more depleted values compared to those obtained by PC and IM. Our results highlight the importance of considering analytical and methodological variations in stable isotope analysis.

Relative quantitation of chiral thiol compounds labeled based on isotope novel mass spectrometry probes: Monitoring of the dynamic changes of chiral thiol compounds in human urine during normal, exercise, and rest recovery states

Monitoring changes in the content of chiral thiol compounds in the human body is crucial for the early diagnosis of oxidative stress-related diseases and the exploration of their pathogenesis. To address this, we synthesized a novel isotope mass spectrometry (MS) probe, denoted as (R)-(5-(3-isothiocyanato (13C) pyrrolidin-1-yl)-5-oxopentyl) triphenylphosphonium (N13CS-OTPP), with triphenylphosphine as its parent structure. In this study, we established a new ultra-high-performance liquid chromatography high-resolution mass spectrometry (UHPLCHRMS) relative quantitative method to monitor chiral thiol compounds in human urine under varying oxidative stress conditions. This method relies on the ratio of 12C/13C isotope-labeled peak areas. To assess the chiral separation efficiency of N13CS-OTPP, we employed three types of thiol compounds (D/L-GSH, D/L-Cys, and D/L-Hcy) and observed separation degrees (Rs) ranging from 1.82 to 1.89. We further validated the accuracy and feasibility of our relative quantitative methods using D/L-Cys-as a model compound. N12C/13CS-OTPP-Cys-exhibited excellent linearity (R2 = 0.9993–0.9994) across different molar ratios (D/L-Cys = 10:1, 4:1, 2:1, 1:1, 1:2, 1:4, 1:10) and achieved a low limit of detection (LOD) of 2.5 fmol. Additionally, we monitored the dynamic changes in urine D/L-Cys-and D/L-Hcy ratios in 12 healthy volunteers (six males and six females) under various oxidative stress states. We generated fitting curves and investigated the trends in chiral thiol compounds in vivo. This study introduces a novel method for the relative quantitative monitoring of chiral thiol compounds in different oxidative stress states within the human body. It also presents a new strategy for understanding the pathogenesis of related diseases resulting from the abnormal metabolism of thiol compounds.

Forensic investigation of falsified antimalarials using isotope ratio mass spectrometry: a pilot investigation

We explored whether isotope ratio mass spectrometry (IRMS) is useful to investigate the origin of falsified antimalarials. Forty-four falsified and genuine antimalarial samples (artesunate, artemether-lumefantrine, dihydroartemisinin-piperaquine and sulphamethopyrazine-pyrimethamine) were analyzed in bulk for carbon (C), nitrogen (N), and oxygen (O) element concentrations and stable isotope ratios. The insoluble fraction (“starch”) was extracted from 26 samples and analyzed. Samples of known geographical origin maize, a common source of excipient starch, were used to produce a comparison dataset to predict starch source. In both an initial (n = 18) and a follow-on set of samples that contained/claimed to contain artesunate/artemether (n = 26), falsified antimalarials had a range of C concentrations less than genuine comparator antimalarials and δ13C values higher than genuine comparators. The δ13C values of falsified antimalarials suggested that C4 plant-based organic material (e.g., starch derived from maize) had been included. Using the known-origin maize samples, predictions for growth water δ18O values for the extracted “starch” ranged from − 6.10 to − 1.62‰. These findings suggest that IRMS may be a useful tool for profiling falsified antimalarials. We found that C4 ingredients were exclusively used in falsified antimalarials versus genuine antimalarials, and that it may be possible to predict potential growth water δ18O values for the starch present in falsified antimalarials.

Development of a Matrix‐Matched Barite Reference Material (NWU‐Brt) for Calibration of In Situ S Isotope Measurements by Laser Ablation Multi‐Collector Inductively Coupled Plasma‐Mass Spectrometry

A new matrix‐matched reference material (NWU‐Brt) with sulfur isotope ratios resembling those of natural barites has been developed for in situ S isotope measurements by laser ablation multi‐collector inductively coupled plasma‐mass spectrometry (LA‐MC‐ICP‐MS). A 100 g quantity of natural barite crystal was milled to ultra‐fine particles and sintered to a solid block using a fast hot‐pressing sintering technique (FHPS). We report δ34S ratios determined by isotope ratio mass spectrometry (IRMS), solution nebuliser multi‐collector inductively coupled plasma‐mass spectrometry (SN‐MC‐ICP‐MS) and LA‐MC‐ICP‐MS, involving up to six participating laboratories. The homogeneity of δ34S ratios of the synthesised barite was tested by LA‐MC‐ICP‐MS with an analytical spot size of 53 μm. The LA‐MC‐ICP‐MS results show that NWU‐Brt demonstrates a satisfactory homogeneous composition and is an appropriate material for calibrating δ34S ratios in barite. IRMS and SN‐MC‐ICP‐MS produced mean δ34S values of +14.17 ± 0.42‰ (2s) and +14.27 ± 0.23‰ (2s), respectively. The results of LA‐MC‐ICP‐MS analyses are consistent with the IRMS and SN‐MC‐ICP‐MS ratios within uncertainty. Overall, our results confirm the suitability of NWU‐Brt for the calibration of δ34S ratios in barite using LA‐MC‐ICP‐MS.

Affordable event and monthly rain samplers: Improving isotopic datasets to understand meteorological processes.

Water-stable isotopes in rainfall are powerful tracers of atmospheric processes at different spatial and temporal scales. However, commercially available rain samplers for isotopic analysis are prohibitively expensive, especially for high spatial resolution networks and studies conducted in developing countries. A low-cost, simple, and robust sampler was designed for event and monthly rainfall samplings. Rainfall collectors were built based on existing designs provided in the literature and using easily accessible materials. Event samplers were filled with different volumes of reference water and left for 72 h in laboratory conditions to determine the minimum amount of rainfall to be collected to minimize isotopic fractionation, from both postsampling evaporation and equilibration. Samples were analyzed using dual-inlet isotope ratio mass spectrometry and cavity ring-down spectroscopy. For samples larger than 4% of the bottle's capacity, the evaporative enrichment due to Rayleigh distillation is negligible compared to the overall analytical uncertainty. Using a tube connecting the funnel to the water sample has proved to reduce postsampling evaporation by at least five times. To limit water self-diffusion, we recommend collecting the largest rainfall amount possible. Under these conditions, these collectors are suitable for rainfall sampling for isotopic analysis. This low-cost methodology will enable isotopic sampling of precipitation at high spatial resolutions and democratize the use of isotopes for hydrological studies in developing countries. All instructions for building and using these samplers are made openly accessible to the scientific community so they can be repeated and adapted to the needs of each project.

Prevalence of nandrolone preparations with endogenous carbon isotope ratios in Australia

AbstractNandrolone and its prohormones, including 19‐norandrost‐4‐ene‐3,17‐dione and 19‐norandrost‐4‐ene‐3β,17β‐diol, are anabolic steroids forbidden at all times in sports according to the World Anti‐Doping Code Prohibited List and its metabolite 19‐norandrosterone (19NA) is the preferred urinary target compound to identify their abuse. In recent years, an increasing number of 19NA isotope ratio mass spectrometry (IRMS) cases have arisen that, based on the initial testing procedure, were likely to result in an adverse analytical finding but were concluded negative after IRMS analysis. The current study was therefore set up to gain a better insight on the prevalence of nandrolone preparations with endogenous carbon isotope ratio values in Australia. Suitable workplace (non‐athlete) urine samples that had previously been reported positive for 19NA were identified and analysed on IRMS. A total of 82% of the samples that were analysed were reported with enriched carbon isotope ratios of 19NA (i.e., 19NA greater than −26‰). This indicates that there is a high prevalence of nandrolone‐containing anabolic androgenic steroid preparations in Australia that have ‘endogenous’ carbon isotope ratios which reduces the ability to identify exogenous nandrolone.

Influence of microbially fermented 2´-fucosyllactose on neuronal-like cell activity in an in vitro co-culture system.

2´-Fucosyllactose (2´-FL), the most abundant oligosaccharide in human milk, plays an important role in numerous biological functions, including improved learning. It is not clear, however, whether 2´-FL or a cleavage product could influence neuronal cell activity. Thus, we investigated the effects of 2´-FL, its monosaccharide fucose (Fuc), and microbial fermented 2´-FL and Fuc on the parameters of neuronal cell activity in an intestinal-neuronal transwell co-culture system in vitro. Native 13C-labeled 2´-FL and 13C-Fuc or their metabolites, fermented with Bifidobacterium (B.) longum ssp. infantis and B. breve, which were taken from the lag-, log- and stationary (stat-) growth phases of batch cultures, were applied to the apical compartment of the co-culture system with Caco-2 cells representing the intestinal layer and all-trans-retinoic acid-differentiated SH-SY5Y (SH-SY5YATRA) cells mimicking neuronal-like cells. After 3 h of incubation, the culture medium in the basal compartment was monitored for 13C enrichment by using elemental analysis isotope-ratio mass spectrometry (EA-IRMS) and effects on cell viability, plasma, and mitochondrial membrane potential. The neurotransmitter activation (BDNF, GABA, choline, and glutamate) of SH-SY5YATRA cells was also determined. Furthermore, these effects were also measured by the direct application of 13C-2´-FL and 13C-Fuc to SH-SY5YATRA cells. While no effects on neuronal-like cell activities were observed after intact 2´-FL or Fuc was incubated with SH-SY5YATRA cells, supernatants from the stat-growth phase of 2´-FL, fermented by B. longum ssp. infantis alone and together with B. breve, significantly induced BDNF release from SH-SY5YATRA cells. No such effects were found for 2´-FL, Fuc, or their fermentation products from B. breve. The BDNF release occurred from an enhanced vesicular release, which was confirmed by the use of the Ca2+-channel blocker verapamil. Concomitant with this event, 13C enrichment was also observed in the basal compartment when supernatants from the stat-growth phase of fermentation by B. longum ssp. infantis alone or together with B. breve were used. The results obtained in this study suggest that microbial products of 2´-FL rather than the oligosaccharide itself may influence neuronal cell activities.

True Ileal Amino Acid Digestibility and Protein Quality of 15N-Labeled Faba Bean in Healthy Humans

BackgroundThe recommended transition toward more plant-based diets, particularly containing legumes, requires a wider knowledge of plant protein bioavailability. Faba beans are cultivated at different latitudes and are used increasingly in human nutrition. ObjectivesWe aimed to assess the nutritional quality of faba bean protein in healthy volunteers equipped with an intestinal tube to implement the ileal 15N balance method. MethodsNine volunteers completed the study (7 males, 2 females, aged 33 ± 10 y, BMI: 24.7 ± 2.6 kg/m2). They were equipped with a nasoileal tube. After fasting overnight, they ingested a test meal consisting of cooked mash of dehulled faba bean seeds (20 g protein per serving of approximately 250 g) intrinsically labeled with 15N. Samples of ileal contents, plasma, and urine were collected over an 8-h postprandial period. Undigested nitrogen (N) and amino acids (AAs) were determined using isotopic MS, and subsequently, ileal digestibility and digestible indispensable amino acid score (DIAAS) were calculated. The measurement of postprandial deamination allowed calculation of the net postprandial protein utilization (NPPU). ResultsThe ileal N digestibility was 84.1% ± 7.7%. Postprandial deamination represented 19.2% ± 3.6% of ingested N, and the NPPU was 64.7% ± 9.7%. The ileal digestibility of individual AAs varied from 85.1% ± 13.7% for histidine to 94.2% ± 3.6% for glutamine + glutamate. The mean AA digestibility was ∼6 percentage points higher than the digestibility of N, reaching 89.8% ± 5.9%, whereas indispensable AA digestibility was 88.0% ± 7.3%. Histidine and tryptophan were the first limiting AAs [DIAAS = 0.77 (calculated by legume-specific N-to-protein conversion factor 5.4); 0.67 (by default factor 6.25)]. Sulfur AAs were limiting to a lesser extent [DIAA ratio = 0.94 (N × 5.4); 0.81 (N × 6.25)]. ConclusionsProtein ileal digestibility of cooked, dehulled faba beans in humans was moderate (<85%), but that of AAs was close to 90%. Overall protein quality was restricted by the limited histidine and tryptophan content.This trial was registered at clinicaltrials.gov as NCT05047757.

Identification of provenance of Basmati rice grown in different regions of Punjab through multivariate analysis

High-priced Basmati rice is vulnerable to deliberate mislabeling to increase profits. This type of fraud may lower consumers’ confidence as inferior products can affect brand reputation. To address this problem, there is a need to devise a method that can efficiently distinguish Basmati rice grown in regions that are famous versus the regions that are not suitable for their production. Therefore, in this investigation, thirty-six samples of Basmati rice were collected from two zones of Punjab province (one known for Basmati rice) of Pakistan which is the major producer of Basmati rice. The elemental composition of rice samples was assessed using inductively coupled plasma-optical emission spectrometry and an organic elemental analyzer, whereas data on δ13C was acquired using isotopic ratio-mass spectrometry. Regional clustering of samples based on their respective cultivation zones was observed using multivariate data analysis techniques. Partial least squares-discriminant analysis was found to be effective in grouping rice samples from the different locations and identifying unknown samples belonging to these two regions. Further recommendations are presented to develop a better model for tracing the origin of unidentified rice samples.

Naturally occurring radioactive materials in offshore infrastructure: Understanding formation and characteristics of baryte scale during decommissioning planning

Contaminants, including naturally occurring radioactive material (NORM) of the 238-uranium and 232-thorium decay series, have been recognized as a global research priority to inform offshore petroleum infrastructure decommissioning decisions. This study aimed to characterize pipeline scale retrieved from a decommissioned subsea well tubular pipe through high-resolution elemental mapping and isotopic analysis. This was achieved by utilizing transmission electron microscopy, Synchrotron x-ray fluorescence, photostimulated luminescence autoradiography and Isotope Ratio Mass Spectrometry. The scale was identified as baryte (BaSO4) forming a dense crystalline matrix, with heterogenous texture and elongated crystals. The changing chemical and physical microenvironment within the pipe influenced the gradual growth rate of baryte over the production life of this infrastructure. A distinct compositional banding of baryte and celestine (SrSO4) bands was observed. Radioactivity attributed by the presence of radionuclides (226Ra, 228Ra) throughout the scale was strongly correlated with baryte. From the detailed scale characterization, we can infer the baryte scale gradually formed within the internals of the tubular well pipe along the duration of production (i.e., 17 years). This new knowledge and insight into the characteristics and formation of petroleum waste products will assist with decommissioning planning to mitigate potential radiological risks to marine ecosystems.

Exploring δ13 C data compatibility in a broad δ13 C range: Reassembling δ13 C values obtained for NIST CO2 RMs 8562-8564 at different laboratories.

Stable isotope datasets obtained in different laboratories over years must be compared and combined. The strict compatibility in δ13 C at ±0.01‰ and ±0.02‰, k= 1, respectively, is required for observations of greenhouse gases CO2 and methane. That implies the long-term compatibility of calibrations realized at different laboratories. Thus far, this level of compatibility has not been demonstrated for pure CO2 in a broad δ13 C range and over years. We reassemble the δ13 C obtained in different laboratories for NIST CO2 RMs 8562-8564, which are pure CO2 gases. If the measurements are based on independent calibrations and reported on the same 17 O correction framework, δ13 C of all three RMs can be used to estimate the long-term δ13 C data compatibility. δ13 C values obtained in different laboratories for NIST CO2 RMs 8562-8564 (a range of δ13 C from ~ -3.7‰ to ~ -41.6‰) from 1998 to 2020 agree within their uncertainties. Two NIST studies (1999 and 2004) have combined data from several laboratories using different Isotope ratio mass spectrometry (IRMS) methods and somewhat different approaches. Three single-laboratory studies (2003, 2008, and 2020) have used the same type of IRMS and similar approaches. The δ13 C values from these laboratories agree within ±0.01‰, k= 1, over the entire δ13 C range and have uncertainties about two times lower than those obtained at NIST by combining data from several laboratories. The δ13 C values for NIST CO2 RMs 8562-8564 obtained in three laboratories using the same IRMS (2003, 2008, and 2020) agree within ±0.01‰, k= 1. First, this confirms the long-term stability in δ13 C of RMs 8562-8564. Second, this example of compatibility in δ13 C calibrations on pure CO2 , from -3.7‰ to -41.6‰, is relevant to stable isotope measurements of greenhouse gases CO2 and methane. Third, this confirms the high accuracy of the δ13 C(air-CO2 ) calibrations performed in 2003 and 2008 for the project Civil Aircraft for the Regular Investigation of the atmosphere Based on an Instrumented Container (CARIBIC).